CCFBG - View topic - Let The Modding Begin...

Page 2 of 24

[ 359 posts ]

Go to page Previous 1, 2, 3, 4, 5 ... 24 Next

Let The Modding Begin...

Author	Message
Ape Man Senior Forum User Joined: Sun Oct 29, 2006 9:26 am Posts: 1947 Location: Fergus, ON	transamtom wrote: Ape Man wrote: Make sure those have AIR and EGR tube connections. My OBX-R ebay headers came with, Longtubes, OR-Y pipe with resonators for like $600.00 shipped. All factory 02's worked, was a really good kit. That kit here : http://cgi.ebay.ca/OBX-Headers-98-99-Ca ... 2c57777ff6 When I was buying them it was shipped to door for $600.00 and didnt include cats..altho those "cats" they are showing are the same things I have and are "resonators". Did you do them yourself? Anything to look for during the install? Did you use the supplied gaskets or different ones? Did it myself. I used all the supplied flange gaskets, but reused by stock manifold gaskets. With the ones I bought I only needed to unbolt the starter and everything fit in beautiful, Ive heard storys of notching the floor, dropping steering column etc etc. With mine, it was bolt in, no modifications. (Passenger side is still tight, and you will sware alot.) _________________ 2002 Pontaic Trans-Am WS.6
Tue Sep 28, 2010 7:24 am

transamtom CCFBG Club Member Joined: Mon Feb 20, 2006 6:15 pm Posts: 1641 Location: Niagara Falls	Lift or jack stands? _________________ 2010 SIM 2SS/RS A6 13.08 at 107.82
Tue Sep 28, 2010 3:58 pm

Ape Man Senior Forum User Joined: Sun Oct 29, 2006 9:26 am Posts: 1947 Location: Fergus, ON	transamtom wrote: Lift or jack stands? Uploaded with ImageShack.us Redneck style, at minus 20* in a storage unit. lol _________________ 2002 Pontaic Trans-Am WS.6
Tue Sep 28, 2010 4:08 pm

transamtom CCFBG Club Member Joined: Mon Feb 20, 2006 6:15 pm Posts: 1641 Location: Niagara Falls	Sounds like fun How about on my back in the gravel driveway I might buy them now and wait until spring. _________________ 2010 SIM 2SS/RS A6 13.08 at 107.82
Tue Sep 28, 2010 4:27 pm

Ape Man Senior Forum User Joined: Sun Oct 29, 2006 9:26 am Posts: 1947 Location: Fergus, ON	transamtom wrote: Sounds like fun How about on my back in the gravel driveway I might buy them now and wait until spring. Sounds just as fun lol. Like I said, only trouble I ran into was the p/s for clearance, do yourself and remove the coil packs, I didnt but GM used some SHARP bolts and the blood stains on my heatercore tell how that worked out! lol Want some sportlines? I can deliver to NF.. _________________ 2002 Pontaic Trans-Am WS.6
Tue Sep 28, 2010 4:39 pm

transamtom CCFBG Club Member Joined: Mon Feb 20, 2006 6:15 pm Posts: 1641 Location: Niagara Falls	Ape Man wrote: transamtom wrote: Sounds like fun How about on my back in the gravel driveway I might buy them now and wait until spring. Sounds just as fun lol. Like I said, only trouble I ran into was the p/s for clearance, do yourself and remove the coil packs, I didnt but GM used some SHARP bolts and the blood stains on my heatercore tell how that worked out! lol Want some sportlines? I can deliver to NF.. Lowering the car will only hurt my 60ft time and cause the headers and y pipe to scrape. It sure looks cool slammed but its not practical. _________________ 2010 SIM 2SS/RS A6 13.08 at 107.82
Tue Sep 28, 2010 5:10 pm

Ape Man Senior Forum User Joined: Sun Oct 29, 2006 9:26 am Posts: 1947 Location: Fergus, ON	I made it over everything, had no issues, expect at my new apartment lol. _________________ 2002 Pontaic Trans-Am WS.6
Tue Sep 28, 2010 5:34 pm

Corp Z Forum Moderator Joined: Thu Feb 23, 2006 7:22 pm Posts: 330 Location: Ubique	I think I should move this to the Project Forum and rename it: "Toms Quest to Grenade his Ten Bolt ASAP" or "Life after your stock clutch packs" _________________ 1996 Camaro Z28 2010 Camaro 2SS 1994 Corvette Z07
Tue Sep 28, 2010 7:21 pm

transamtom CCFBG Club Member Joined: Mon Feb 20, 2006 6:15 pm Posts: 1641 Location: Niagara Falls	Corp Z wrote: I think I should move this to the Project Forum and rename it: "Toms Quest to Grenade his Ten Bolt ASAP" or "Life after your stock clutch packs" Only if I had the row your own option The automatic makes it a little easier on it _________________ 2010 SIM 2SS/RS A6 13.08 at 107.82
Tue Sep 28, 2010 8:28 pm

transamtom CCFBG Club Member Joined: Mon Feb 20, 2006 6:15 pm Posts: 1641 Location: Niagara Falls	Just ordered my OBX Headers going to install them in my friends garage. _________________ 2010 SIM 2SS/RS A6 13.08 at 107.82
Wed Sep 29, 2010 7:03 pm

Corp Z Forum Moderator Joined: Thu Feb 23, 2006 7:22 pm Posts: 330 Location: Ubique	At Toms request this will be moving to the Projects Forum...... _________________ 1996 Camaro Z28 2010 Camaro 2SS 1994 Corvette Z07
Wed Sep 29, 2010 7:18 pm

transamtom CCFBG Club Member Joined: Mon Feb 20, 2006 6:15 pm Posts: 1641 Location: Niagara Falls	Corp Z wrote: At Toms request this will be moving to the Projects Forum...... Thanks Chris _________________ 2010 SIM 2SS/RS A6 13.08 at 107.82
Wed Sep 29, 2010 7:50 pm

transamtom CCFBG Club Member Joined: Mon Feb 20, 2006 6:15 pm Posts: 1641 Location: Niagara Falls	Zdrrguy wrote: Come on Tom , dont be holding out on us now! Well I found my cable but the batteries died during the download. I have one crappy pic _________________ 2010 SIM 2SS/RS A6 13.08 at 107.82
Wed Sep 29, 2010 7:54 pm

transamtom CCFBG Club Member Joined: Mon Feb 20, 2006 6:15 pm Posts: 1641 Location: Niagara Falls	Just bought some subframe connectors and a tranny mount. Shaved the body side moldings. Doing the rear seat delete tonight. Going to the track tommorow. _________________ 2010 SIM 2SS/RS A6 13.08 at 107.82
Fri Oct 08, 2010 5:45 am

transamtom CCFBG Club Member Joined: Mon Feb 20, 2006 6:15 pm Posts: 1641 Location: Niagara Falls	Got my headers today,best $475.00 I have ever spent on headers If they flow as good as they look I should get 30/30 easy _________________ 2010 SIM 2SS/RS A6 13.08 at 107.82
Fri Oct 08, 2010 5:17 pm

Display posts from previous: Sort by

Page 2 of 24

[ 359 posts ]

Go to page Previous 1, 2, 3, 4, 5 ... 24 Next

Let The Modding Begin...

Who is online