Author |
Message |
Mr Bastard
CCFBG Club Member
Joined: Sat Mar 19, 2005 8:07 pm Posts: 4327 Location: The big town
|
Re: "The Project" - Begins
looking good Bill, other then the 5.0lg on the block
_________________9.06@155 mph, small block pump gas with 3.42's bird 8.14@166 mph, big block on 250 shot monza
|
Sun Dec 15, 2013 10:01 am |
|
|
The Project
Forum Moderator
Joined: Sat Jun 02, 2007 4:39 pm Posts: 2433 Location: In the Garage
|
Re: "The Project" - Begins
Tranny rebuild time!!!! Pulled the trans apart on Saturday and gave it the once over. Seems to look pretty clean inside with no excessive signs of wear. All the old parts will be put the "hot tank" for a good clean with all new internals going in next week. Pics of the servos and "The Beast"
_________________Just rolling with the dog pound...
|
Mon Jun 09, 2014 12:54 pm |
|
|
Z28 MeTaL HeAd
CCFBG Club Member
Joined: Tue Feb 28, 2006 1:42 pm Posts: 2739 Location: Mississauga
|
Re: "The Project" - Begins
Are you replacing the clutches and bands?
Make sure you pickup a brand new drum if you are. No matter what someone else tells you, if you mill/machine the drum even once from a 700/4l60 and then reuse it, it'll warp, distort and boch your new rebuild.
Good luck.
_________________2012 Camaro 2SS/RS - LS3/TR6060: BTR Cam, Long Tubes, 3" Catback, UDP, CAI Intake, Air Scoop, 3.91 Gears, Poly Diff Bushings, Toe Arms, Poly Subframe, Poly Radius-Rod bushings, ZL1 Suede Shifter, ZL1 Mounts, Arun Tuned - 475rwhp 443rwtq 11.97 @ 116 w/ 1.85 60'Listen To Song Of My People!
|
Tue Jun 10, 2014 3:23 pm |
|
|
The Project
Forum Moderator
Joined: Sat Jun 02, 2007 4:39 pm Posts: 2433 Location: In the Garage
|
Re: "The Project" - Begins
No worries.....EVERYTHING is getting replaced.
_________________Just rolling with the dog pound...
|
Tue Jun 10, 2014 8:21 pm |
|
|
6SIX6
CCFBG Club Member
Joined: Thu Jul 05, 2007 5:32 am Posts: 1508 Location: Miserysauga , Ontario
|
Re: "The Project" - Begins
You need to get this done Bill
_________________My FQuickMy GarageTHE MISSISSAUGA CHAPTER
|
Wed Jun 11, 2014 2:47 pm |
|
|
ktuga
CCFBG Club Member
Joined: Tue Mar 10, 2009 11:23 pm Posts: 223
|
Re: "The Project" - Begins
6SIX6 wrote: You need to get this done Bill AMEN
|
Fri Jun 13, 2014 2:22 am |
|
|
The Project
Forum Moderator
Joined: Sat Jun 02, 2007 4:39 pm Posts: 2433 Location: In the Garage
|
Re: "The Project" - Begins
Had a little setback with the trans rebuild. Decided to clean and paint the throttle body. Used a half can of Throttle Body Cleaner and some q-tips to get into the corners. Now its nice and clean. Also, added a new IROC Z plate I picked up from ebay a while back. Overall, pretty happy with the results. Used VHT Chassis paint in satin black.
_________________Just rolling with the dog pound...
|
Sun Jun 15, 2014 7:21 pm |
|
|
6SIX6
CCFBG Club Member
Joined: Thu Jul 05, 2007 5:32 am Posts: 1508 Location: Miserysauga , Ontario
|
Re: "The Project" - Begins
Now it needs to be in a car and running. Come on bill your killing me not to see it on the road
_________________My FQuickMy GarageTHE MISSISSAUGA CHAPTER
|
Sun Jun 15, 2014 8:06 pm |
|
|
The Project
Forum Moderator
Joined: Sat Jun 02, 2007 4:39 pm Posts: 2433 Location: In the Garage
|
Re: "The Project" - Begins
_________________Just rolling with the dog pound...
|
Sat Jun 21, 2014 10:42 pm |
|
|
The Project
Forum Moderator
Joined: Sat Jun 02, 2007 4:39 pm Posts: 2433 Location: In the Garage
|
Re: "The Project" - Begins
_________________Just rolling with the dog pound...
|
Sun Jun 29, 2014 4:05 pm |
|
|
The Project
Forum Moderator
Joined: Sat Jun 02, 2007 4:39 pm Posts: 2433 Location: In the Garage
|
Re: "The Project" - Begins
_________________Just rolling with the dog pound...
|
Wed Jul 02, 2014 6:59 pm |
|
|
The Project
Forum Moderator
Joined: Sat Jun 02, 2007 4:39 pm Posts: 2433 Location: In the Garage
|
Re: "The Project" - Begins
_________________Just rolling with the dog pound...
|
Sat Jul 12, 2014 7:33 pm |
|
|
cam
Senior Forum User
Joined: Sun May 13, 2007 10:48 am Posts: 984
|
Re: "The Project" - Begins
Intake looks mint!
_________________ 1987 IROC ww 99 LS1,TR224/112, STG2 heads ported by American Speed, P Gold springs, LS6 intake, SVO 30's, Ported TB, Comp Cromo Push rods, Katech Rod bolts, LS6 oil pump, T56, SW LT's, 8.8 hybrid rear 3.73, 275/40/17 MT ET streets, lots more
12.1 @ 112 mph 1.69 60'
89 R7U 1LE Players Challenge car all stock.
|
Sun Jul 13, 2014 3:15 pm |
|
|
The Project
Forum Moderator
Joined: Sat Jun 02, 2007 4:39 pm Posts: 2433 Location: In the Garage
|
Re: "The Project" - Begins
Got the intake from a guy in Alberta. He never installed it. I gasket matched the intake runners and exhaust gasket and smoothed out everything inside with the dremmel.
_________________Just rolling with the dog pound...
|
Sun Jul 13, 2014 4:54 pm |
|
|
cam
Senior Forum User
Joined: Sun May 13, 2007 10:48 am Posts: 984
|
Re: "The Project" - Begins
I noticed that, clean patient work. Looks pro
_________________ 1987 IROC ww 99 LS1,TR224/112, STG2 heads ported by American Speed, P Gold springs, LS6 intake, SVO 30's, Ported TB, Comp Cromo Push rods, Katech Rod bolts, LS6 oil pump, T56, SW LT's, 8.8 hybrid rear 3.73, 275/40/17 MT ET streets, lots more
12.1 @ 112 mph 1.69 60'
89 R7U 1LE Players Challenge car all stock.
|
Sun Jul 13, 2014 6:41 pm |
|
|
|
Who is online |
Users browsing this forum: No registered users and 0 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|